Editing Infrastructure Machines (section)

== Disaster Recovery ==

If there is ever an outage with the firewall, the old firewall "gate" is located just below and is running with the proper network configuration, but with no firewall rules in place (to facilitate good throughput). Have castle move the cable on the left on the current firewall to the left port in the old firewall and the right cable to the right port.

Here's what you need to put in /etc/rc.conf to get a firewall going (as far as routes and IPs)

<pre>hostname="newgateway.johncompanies.com"
firewall_script="/etc/firewall.sh"
firewall_enable="NO"
sendmail_enable="NONE"
sshd_enable="YES"
inetd_enable="NO"
xntpd_enable="YES"
snmpd_enable="YES"
#snmpd_flags="-as -p /var/run/snmpd.pid"
#ipnat_enable="YES"
#ipnat_rules="/etc/ipnat.rules"
gateway_enable="YES"

defaultrouter="69.55.233.161"

ifconfig_xl0="inet 10.1.4.223 netmask 255.255.255.0"
ifconfig_em0="inet 69.55.233.164 netmask 255.255.255.248"

#
# Original JohnCompanies 69.55.224.0/20
#
ifconfig_em1="inet 69.55.233.156 netmask 255.255.255.248"

static_routes="route1 route2 route3 route4 route5 route6 route7 route8 route9 route10 route11 route1
2 route13 route14 route15 route16 route17 route18"

route_route1="-net 69.55.224.0 69.55.233.153"
route_route2="-net 69.55.225.0 69.55.233.153"
route_route3="-net 69.55.226.0 69.55.233.153"
route_route4="-net 69.55.227.0 69.55.233.153"
route_route5="-net 69.55.228.0 69.55.233.153"
route_route6="-net 69.55.229.0 69.55.233.153"
route_route7="-net 69.55.230.0 69.55.233.153"
route_route8="-net 69.55.231.0 69.55.233.153"
route_route9="-net 69.55.232.0 69.55.233.153"
route_route10="-net 69.55.233.0 69.55.233.153"
route_route11="-net 69.55.234.0 69.55.233.153"
route_route12="-net 69.55.235.0 69.55.233.153"
route_route13="-net 69.55.236.0 69.55.233.153"
route_route14="-net 69.55.237.0 69.55.233.153"
route_route15="-net 69.55.238.0 69.55.233.153"
route_route16="-net 69.55.239.0 69.55.233.153"
route_route17="-net 10.1.5.0 10.1.4.2"
route_route18="-net 10.1.6.0 10.1.4.2"


#In case of 3750 failure:
#defaultrouter="69.43.128.81"
#ifconfig_em0="inet 69.43.129.84 netmask 255.255.255.248"

#bind .1's here:
#ifconfig_em1="inet 69.55.224.1 netmask 255.255.255.0"
#ifconfig_em1_alias0="inet 69.55.225.1 netmask 255.255.255.0"
#ifconfig_em1_alias1="inet 69.55.226.1 netmask 255.255.255.0"
#ifconfig_em1_alias2="inet 69.55.227.1 netmask 255.255.255.0"
#ifconfig_em1_alias3="inet 69.55.228.1 netmask 255.255.255.0"
#ifconfig_em1_alias4="inet 69.55.229.1 netmask 255.255.255.0"
#ifconfig_em1_alias5="inet 69.55.230.1 netmask 255.255.255.0"
#ifconfig_em1_alias6="inet 69.55.231.1 netmask 255.255.255.0"
#ifconfig_em1_alias7="inet 69.55.232.1 netmask 255.255.255.0"
#ifconfig_em1_alias8="inet 69.55.233.1 netmask 255.255.255.0"
#ifconfig_em1_alias9="inet 69.55.234.1 netmask 255.255.255.0"
#ifconfig_em1_alias10="inet 69.55.235.1 netmask 255.255.255.0"
#ifconfig_em1_alias11="inet 69.55.236.1 netmask 255.255.255.0"
#ifconfig_em1_alias12="inet 69.55.237.1 netmask 255.255.255.0"
#ifconfig_em1_alias13="inet 69.55.238.1 netmask 255.255.255.0"
#ifconfig_em1_alias14="inet 69.55.239.1 netmask 255.255.255.0"

#bulk:
# reassign 69.55.231.1 to the int iface on the firewall
# set the DG on the firewall to 69.43.138.9
# set the ext firewall IP to 69.43.138.12, NM: 255.255.255.248</pre>