Editing RAID Cards (section)

== Notes ==

To replace a failed mirror with the drive that failed, boot up with only the failed drive (to be safe, make sure the other drive boots fine), delete the mirror on the bad drive. Boot up again with both drives and select the failed (now empty/available drive) and the remaining degraded mirror and select to rebuild. Hit F8 on the way out to save/rebuild.

*adding mirror(s) to a new/empty machine (with no os)
*adding mirror(s) to a running machine
*moving mirror(s) to a new/empty machine (with no os)
*moving mirror(s) to a running machine
*replacing dead/degraded mirror on running machine (please include pointers on 
which spare drives can be used as replacements*)
*silencing alarms (a nod to castle staff)

*please include documentation for both CLI and BIOS apps. where appropriate and 
where differences exist.
*include instructions up to the point where the partition is mounted and usable 
(or recognized by os in the case of new install)
*please include (separate) instructions for clearing off used drive so it can 
be reused in above procedures.

Tech support: 800 840-6055