Editing Jail Server Install (section)

= Reloading FreeBSD (while preserving customer data) =

<pre>2. assuming 2 mirrors, boot to disk 1 of 4.11 
skip kernel config (enter)
custom install
(skip partition)
label
move cursor to aacd0, hit space (takes you to partition map screen)
given this as the pre-existing partition map:
Filesystem    1K-blocks   Used    Avail Capacity  Mounted on
/dev/aacd0s1a    128990  36888    81784    31%    /
/dev/aacd0s1h  30499106      4 28059174     0%    /mnt/data1
/dev/aacd1s1e  69526550      4 63964422     0%    /mnt/data2
/dev/aacd0s1f    257998     10   237350     0%    /tmp
/dev/aacd0s1g   3096462 852082  1996664    30%    /usr
/dev/aacd0s1e    257998   1198   236162     1%    /var
procfs                4      4        0   100%    /proc

relabel and all mount points according to prev settings

or, delete all partitions except for data parts, re-create as necessary

re-toggle newfs on all mount points except for /mnt/data1 - make sure under the Newfs column the data1 (and data2) partiotions look like: UFS+S Y

make sure under the Newfs column the data1 (and data2) partiotions look like
UFS+S N

space to unselect aacd0
cursor over aacd1
space

Space to select both drives and tab to ok

Continue installation as per normal
distributions
developer
yes to install ports
exit
media
cd
commit
yes
(2450: 16mins, supermicro: 11mins)
yes to "visit general config"
Set root pwd
Add user ‘user’ member group is wheel, set password
Set tz
Networking->interfaces->Fxp0
No IPV6
dhcp=yes
Set hostname & domain

exit...
exit install
yes
take the cd out and let the machine reboot</pre>