Editing Infrastructure Machines (section)

= console = 

== Summary ==
This box's only purpose is to serve as a means to connect to the digi serial multiplexer boxes at castle. Connect to it using the blue (cisco) ribbon cable with the beige RJ-45 to serial connector, 9600 8N1.

OBSOLETE
* Location: castle, cab 3-8
* OS: SunOS 5.8 (solaris)
* Networking: Priv IP: 10.1.4.4
* Hardware: Sun Netra


To connect to consoles, ssh in as user 'console' and use the <tt>tip</tt> command to connect to devices listed in <tt>/etc/remote</tt>

SSH WORK ~2021
ssh user@console.johncompanies.com <br>

PW: 674*****

i.e.
 tip switch-p1
 tip jail1

== Configuring digi/ports == 

=== /etc/remote ===
This is where the configuration/mapping for ports and custom names which we use along with the tip command to connect to various ports on the digi switches.

We have 2 digi's at castle we connect to:

 #3-7 10.1.4.10
 virt15:dv=/dev/dty/CO001s:br#38400:el=^C^S^Q^U^D:ie=%$:oe=^D:
 virt13:dv=/dev/dty/CO002s:br#115200:el=^C^S^Q^U^D:ie=%$:oe=^D:hf:

and 

 #3-6 10.1.4.11
 jail4:dv=/dev/dty/CP001s:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:hf:
 jail16:dv=/dev/dty/CP002s:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:hf:

The only things you need to edit are the first part (i.e. <tt>jail4</tt>) and the speed (i.e. <tt>9600</tt>). You can decipher which port on the digi each line corresponds to by the <tt>CP001s or CO001s</tt> (port 1 on digi1 and digi2), <tt>CP002s or CO002s</tt> (port 2 on digi1 and digi2)

=== drpadmin ===
The tool you use to configure a device to a digi box is drpadmin:

<pre>bash-2.03$ su
Password:
# drpadmin

Please select an option (a)dd (d)elete (s)how (r)eset (q)uit : s
0       10.1.4.10       32      CO      771     never   1027
1       10.1.4.11       32      CP      771     never   1027
2       65.116.11.2     8       el      771     never   1027

Please select an option (a)dd (d)elete (s)how (r)eset (q)uit :</pre>

Use those commands above to modify the devices available.

== Switching IP/hostname ==

Edit:
 /etc/defaultrouter
 /etc/hosts
 /etc/hostname.hme0
 /etc/nodename
 Maybe needed to run: # ifconfig hme0 10.1.4.4 up